1. Follow the safety guidelines listed in the Safety instructions section
2. Follow the procedure listed in the Before working inside your system section.
CAUTION:
Do not use excessive force when removing the control panel as it can damage the connectors.
Steps
1. Remove the screw(s) securing the control panel module to the chassis.
2. Disconnect all the cables connecting the control panel module to the chassis.
3. Slide the control panel module and lift it away from the system.
Figure 67. Removing the control panel module—four hard drive chassis
a. control panel module
b. screw (2)
c. control panel module connector cable
Installing and removing system components
111
