Specifications: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/specs.htm[10/31/2012 8:07:23 AM]
NOTE:
The 10-pin header connector used
for the optional Media Card Reader is
populated with only nine pins for keying
purposes.
Audio
six back panel connectors for line-in, line-
out/headphone, rear surround sound,
microphone, side surround sound, and
center/Low Frequency Effects (LFE)
channel
back panel S/PDIF connector
front panel miniature headphone
connector for line-out
front panel microphone connector
Network adapter
RJ45 connector
Modem
RJ11 (MDC 1.5) connector and internally
accessible 3-pin header that connects the
modem to RJ11
Temperature Sensor
one 2-pin connector
System board connectors:
Serial ATA
two 7-pin connectors
Fan
two 5-pin connectors (one for the CPU fan
and one for the optional hard drive fan
connector.)
PCI Express x1
36-pin connector
PCI Express x16
164-pin connector
USB
10-pin header for optional Media Card
Reader (3.5-inch bay device)
MDC
one 12-pin connector
Floppy connector
one 26-pin connector
Front panel
one 40-pin header
Power
one 2 x 12 connector
Processor power
one 2 x 2 connector
IEEE 1394
one 2 x 5 header — always connected by
cable to the front panel; supports front
panel IEEE 1394 port
Controls and Lights
Power control
push button
Power light
green light — Blinking green in sleep
state; solid green for power-on state.
amber light — Blinking amber indicates a
problem with an installed device; solid
amber indicates an internal power
problem (see "Power Problems" in your
computer
Owner's Manual)
.
Hard drive access light
green
Link integrity light (on integrated network
adapter)
green light — A good connection exists
between a 10-Mbps network and the
computer.
