manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

iSCSI Protocol: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/iscsi.htm[9/26/2012 3:29:03 PM]

29

Error

Target rejected an iSCSI PDU sent by the initiator. Dump data contains the rejected PDU.

30

Error

Initiator could not allocate a work item for processing a request.

31

Error

Initiator could not allocate resource for processing a request.

32

Information Initiator received an asynchronous logout message. The Target name is given in the dump data.

33

Error

Challenge size given by the target exceeds the maximum specified in iSCSI specification.

34

Information A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data

contains the target name.

35

Error

Target CHAP secret is smaller than the minimum size (12 bytes) required by the specification.

36

Error

Initiator CHAP secret is smaller than the minimum size (12 bytes) required by the specification.

Dump data contains the given CHAP secret.

37

Error

FIPS service could not be initialized. Persistent logons will not be processed.

38

Error

Initiator requires CHAP for logon authentication, but target did not offer CHAP.

39

Error

Initiator sent a task management command to reset the target. The target name is given in the

dump data.

40

Error

Target requires logon authentication via CHAP, but Initiator is not configured to perform CHAP.

41

Error

Target did not send AuthMethod key during security negotiation phase.

42

Error

Target sent an invalid status sequence number for a connection. Dump data contains Expected Status

Sequence number followed by the given status sequence number.

43

Error

Target failed to respond in time for a login request.

44

Error

Target failed to respond in time for a logout request.

45

Error

Target failed to respond in time for a login request. This login request was for adding a new

connection to a session.

46

Error

Target failed to respond in time for a SendTargets command.

47

Error

Target failed to respond in time for a SCSI command sent through a WMI request.

48

Error

Target failed to respond in time to a NOP request.

49

Error

Target failed to respond in time to a Task Management request.

50

Error

Target failed to respond in time to a Text Command sent to renegotiate iSCSI parameters.

51

Error

Target failed to respond in time to a logout request sent in response to an asynchronous message

from the target.

52

Error

Initiator Service failed to respond in time to a request to configure IPSec resources for an iSCSI

connection.

53

Error

Initiator Service failed to respond in time to a request to release IPSec resources allocated for an

iSCSI connection.

54

Error

Initiator Service failed to respond in time to a request to encrypt or decrypt data.

55

Error

Initiator failed to allocate resources to send data to target.

56

Error

Initiator could not map an user virtual address to kernel virtual address resulting in I/O failure.

57

Error

Initiator could not allocate required resources for processing a request resulting in I/O failure.

58

Error

Initiator could not allocate a tag for processing a request resulting in I/O failure.

59

Error

Target dropped the connection before the initiator could transition to Full Feature Phase.

60

Error

Target sent data in SCSI Response PDU instead of Data_IN PDU. Only Sense Data can be sent in

SCSI Response.

61

Error

Target set DataPduInOrder to NO when initiator requested YES. Login will be failed.

62

Error

Target set DataSequenceInOrder to NO when initiator requested YES. Login will be failed.

63

Error

Cannot reset the target or LUN. Will attempt session recovery.

64

Information Attempt to bootstrap Windows using iSCSI NIC Boot (iBF).

65

Error

Booting from iSCSI, but could not set any NIC in Paging Path.

66

Error

Attempt to disable the Nagle Algorithm for iSCSI connection failed.

67

Information If Digest support selected for iSCSI Session, will use Processor support for Digest computation.

68

Error

After receiving an async logout from the target, attempt to relogin the session failed. Error status is

given in the dump data.

69

Error

Attempt to recover an unexpected terminated session failed. Error status is given in the dump data.

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Brand: Lucent Technologies Pages: 20
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Brand: Patton electronics Pages: 2
Lanner NCA-1525 User Manual preview
NCA-1525
Brand: Lanner Pages: 78
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
SurfControl 509-8629-00 Setup Manual preview
509-8629-00
Brand: SurfControl Pages: 2
Quatech Device Server User Manual preview
Device Server
Brand: Quatech Pages: 98
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
Intellinet 560665 User Manual preview
560665
Brand: Intellinet Pages: 32
TRENDnet TEM-560T Specifications preview
TEM-560T
Brand: TRENDnet Pages: 2
H3C CR16000-M Installation, Quick Start preview
CR16000-M
Brand: H3C Pages: 4
Olicom Broadband Wireless Router None Introduction preview
Broadband Wireless Router None
Brand: Olicom Pages: 5
NETGEAR WNR2000v2 - Wireless- N 300 Router User Manual preview
WNR2000v2 - Wireless- N 300 Router
Brand: NETGEAR Pages: 144
IBM BladeCenter 1/10 Gb Uplink Ethernet SwitchModule Installation Manual preview
BladeCenter 1/10 Gb Uplink Ethernet SwitchModule
Brand: IBM Pages: 58

Brands by name

Popular brands

Load more brands