manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Virtual LANs: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/vlan.htm[9/26/2012 3:28:33 PM]

separation between all of them.

Accounting

Server

Available to VLAN #3 only. The Accounting Server is isolated from all traffic on VLANs #1 and #2. The switch

port connected to the server has tagging turned off.

PCs #1 and

#2

Attached to a shared media hub that is then connected to the switch. PCs #1 and #2 belong to VLAN #2 only,

and are logically in the same IP subnet as the Main Server and PC #5. The switch port connected to this

segment has tagging turned off.

PC #3

A member of VLAN #1, PC #3 can communicate only with the Main Server and PC #5. Tagging is not enabled

on PC #3 switch port.

PC #4

A member of VLAN #3, PC #4 can only communicate with the servers. Tagging is not enabled on PC #4 switch

port.

PC #5

A member of both VLANs #1 and #2, PC #5 has an Broadcom adapter installed. It is connected to switch port

#10. Both the adapter and the switch port are configured for VLANs #1 and #2 and have tagging enabled.

 NOTE: VLAN tagging is only required to be enabled on switch ports that create trunk links to other switches, or on ports

connected to tag-capable end-stations, such as servers or workstations with Broadcom adapters.

Adding VLANs to Teams

Each team supports up to 64 VLANs (63 tagged and 1 untagged). Note that only Broadcom adapters and Alteon

®

 AceNIC

adapters can be part of a team with VLANs. With multiple VLANs on an adapter, a server with a single adapter can have a

logical presence on multiple IP subnets. With multiple VLANs in a team, a server can have a logical presence on multiple IP

subnets and benefit from load balancing and failover. For instructions on adding a VLAN to a team, see 

Adding a VLAN

 for

Windows operating systems.

 NOTE: Adapters that are members of a failover team can also be configured to support VLANs. Because VLANs are not

supported for an Intel LOM, if an Intel LOM is a member of a failover team, VLANs cannot be configured for that team.

Please read all 

Restrictions and Disclaimers

.

Back to Contents Page

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

D-Link DIR-855L Quick Installation Manual preview
DIR-855L
Brand: D-Link Pages: 28
D-Link DIR-826L Quick Install Manual preview
DIR-826L
Brand: D-Link Pages: 2
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Quick Start Manual preview
DIR-655 - Xtreme N Gigabit Router Wireless
Brand: D-Link Pages: 3
D-Link DIR-605L Technical Support Setup Procedure preview
DIR-605L
Brand: D-Link Pages: 11
D-Link DIR-880L Quick Install Manual preview
DIR-880L
Brand: D-Link Pages: 12
D-Link DIR-842 Quick Install Manual preview
DIR-842
Brand: D-Link Pages: 12
D-Link DIR-821 Quick Install Manual preview
DIR-821
Brand: D-Link Pages: 24
D-Link DIR-803 Quick Installation Manual preview
DIR-803
Brand: D-Link Pages: 20
D-Link DIR-815/AC Quick Installation Manual preview
DIR-815/AC
Brand: D-Link Pages: 44
D-Link DIR-830M Quick Installation Manual preview
DIR-830M
Brand: D-Link Pages: 52
D-Link DIR-821 User Manual preview
DIR-821
Brand: D-Link Pages: 103
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Brand: Allied Telesis Pages: 3
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Brand: KEMP Technologies Pages: 71
Winext GW5000A Manual preview
GW5000A
Brand: Winext Pages: 37
ZyXEL Communications NBG-460N Manual preview
NBG-460N
Brand: ZyXEL Communications Pages: 5
netsys NVF-2400S User Manual preview
NVF-2400S
Brand: netsys Pages: 164

Brands by name

Popular brands

Load more brands