manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Installing the Hardware: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/install.htm[9/26/2012 3:28:37 PM]

Back to Contents Page

Installing the Hardware: Broadcom NetXtreme II Network

Adapter User Guide

 

Overview

 

System Requirements

 

Safety Precautions

 

Preinstallation Checklist

 

Installation of the Add-In NIC

Overview

This section applies to Broadcom NetXtreme II add-in network interface cards.

System Requirements

Before you install a Broadcom NetXtreme II adapter, verify that your system meets the following hardware and operating

system requirements:

Hardware Requirements

IA32- or EMT64-based computer that meets operating system requirements
One open slot: PCI Express 1.0a x4 or PCI Express Gen2 x8
128-MB RAM (minimum)

Operating System Requirements

General

PCI Express v1.0a, x4 (or greater) Host Interface

Microsoft Windows

One of the following versions of Microsoft Windows:

Windows Server 2008 family
Windows Server 2008 R2 family

Novell NetWare

Novell NetWare 6.5 with the latest support pack.

Linux

Although the adapter driver should work with many Linux kernel versions and distributions, it has only been tested on 2.4x

kernels (starting from 2.4.24) and 2.6.x kernels. The driver may not compile on kernels older than 2.4.24. Testing is

concentrated on i386 and x86_64 architectures. Only limited testing has been done on other architectures. Minor changes to

some source files and Makefile may be needed on some kernels.

VMware ESX

VMware ESX

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

Patton electronics 4520 Specification Sheet preview
4520
Brand: Patton electronics Pages: 2
Patton electronics 4520 Getting Started Manual preview
4520
Brand: Patton electronics Pages: 86
?omtime CT-Router LAN User Manual preview
CT-Router LAN
Brand: ?omtime Pages: 62
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
Aztech DSL1000EW(L) Speci?Cations preview
DSL1000EW(L)
Brand: Aztech Pages: 2
Idis DR-8400 Installation Manual preview
DR-8400
Brand: Idis Pages: 31
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Brand: Riverbed Pages: 38
LGC wireless InterReach Fusion SingleStar Installation And Operation Manual preview
InterReach Fusion SingleStar
Brand: LGC wireless Pages: 154
ZoneVu ZSI-450-IP Installation Manual & User Manual preview
ZSI-450-IP
Brand: ZoneVu Pages: 15
AMX AXB-PSCV Dimensional Drawing preview
AXB-PSCV
Brand: AMX Pages: 1
Digisol DG-BG4100NU Quick Installation Manual preview
DG-BG4100NU
Brand: Digisol Pages: 22
LevelOne FSW-0808TX Quick Start Manual preview
FSW-0808TX
Brand: LevelOne Pages: 3
Waver WAC52N Quick Start Manual preview
WAC52N
Brand: Waver Pages: 36
Comet Labs 24-Port 1000BASE-T User Manual preview
24-Port 1000BASE-T
Brand: Comet Labs Pages: 44
National Datacomm 9210S01 User Manual preview
9210S01
Brand: National Datacomm Pages: 62
OWC MINISTACK STX User Manual preview
MINISTACK STX
Brand: OWC Pages: 8
Muratec OFFICEBRIDGE ONLINE User Manual preview
OFFICEBRIDGE ONLINE
Brand: Muratec Pages: 220
D-Link mydlink DCH-S220 User Manual preview
mydlink DCH-S220
Brand: D-Link Pages: 35

Brands by name

Popular brands

Load more brands