manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Linux Driver Software: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/linux.htm[9/26/2012 3:28:46 PM]

drivers for other Linux versions can be compiled by modifying the Makefile and the make environment. Further information is

available from the Red Hat website, 

http://www.redhat.com

.

Setting Values for Optional Properties

Optional properties exist for the different drivers:

bnx2 Driver
bnx2x Driver
bnx2i Driver

bnx2 Driver

disable_msi

The 

disable_msi

 optional property can be supplied as a command line argument to the insmod or modprobe command. The

property can also be set in modprobe.conf. See the man page for more information. All other driver settings can be queried

and changed using the ethtool utility. See the ethtool man page for more information. The ethtool settings do not persist

across a reboot or module reload. The ethtool commands can be put in a startup script such as /etc/rc.local to preserve the

settings across a reboot.

 NOTE: Some combinations of property values may conflict and result in failures. The driver cannot detect all such

conflicting combinations.

This property is used to disable Message Signal Interrupts (MSI), and the property is valid only on 2.6 kernels that support

MSI. By default, the driver enables MSI if it is supported by the kernel. It runs an interrupt test during initialization to

determine if MSI is working. If the test passes, the driver enables MSI. Otherwise, it uses legacy INTx mode.

insmod bnx2.ko disable_msi=1

or

modprobe bnx2 disable_msi=1

bnx2x Driver

disable_tpa

The 

disable_tpa

 parameter can be supplied as a command line argument to disable the Transparent Packet Aggregation

(TPA) feature. By default, the driver will aggregate TCP packets. Use disable_tpa to disable the advanced TPA feature.

Set the 

disable_tpa

 parameter to 1 as shown below to disable the TPA feature on all NetXtreme II network adapters in the

system. The parameter can also be set in modprobe.conf. See the man page for more information.

insmod bnx2x.ko disable_tpa=1

or

modprobe bnx2x  disable_tpa=1

int_mode

The 

int_mode

 parameter is used to force using an interrupt mode.

Set the 

int_mode

 parameter to 1 to force using the legacy INTx mode on all NetXtreme II adapters in the system.

insmod bnx2x.ko int_mode=1

or

modprobe bnx2x  int_mode=1

Set the 

int_mode

 parameter to 2 to force using MSI mode on all NetXtreme II adapters in the system.

insmod bnx2x.ko int_mode=2

or

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

Observint NVR4 Firmware User Manual preview
NVR4
Brand: Observint Pages: 117
PairGain PG-FLEX RT FRL-752 Manual preview
PG-FLEX RT FRL-752
Brand: PairGain Pages: 6
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Brand: PaloAlto Networks Pages: 90
Novus NVIP- NVRA0104/GO User Manual preview
NVIP- NVRA0104/GO
Brand: Novus Pages: 44
Dust Networks SmartMesh IA-510 D2511 Manager'S Manual preview
SmartMesh IA-510 D2511
Brand: Dust Networks Pages: 30
Draytek Vigor 2700G Specifications preview
Vigor 2700G
Brand: Draytek Pages: 2
Genie IP8ESP User Manual preview
IP8ESP
Brand: Genie Pages: 6
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24
Patton electronics ipRocketLink 3086FR Quick Start Manual preview
ipRocketLink 3086FR
Brand: Patton electronics Pages: 12
Matrix Switch Corporation MSC-CP16X4E Product Manual preview
MSC-CP16X4E
Brand: Matrix Switch Corporation Pages: 48
Lanpro LP-F22 Series Assembling Instructions preview
LP-F22 Series
Brand: Lanpro Pages: 3
Radio Shack TRS-80 PTC-64 Operation Manual preview
TRS-80 PTC-64
Brand: Radio Shack Pages: 40
Moxa Technologies PowerTrans PT-7728 Hardware Installation Manual preview
PowerTrans PT-7728
Brand: Moxa Technologies Pages: 8
TP-Link TL-R470T Plus Configuration Manual preview
TL-R470T Plus
Brand: TP-Link Pages: 182
Waver Smart One WAC52G Quick Start Manual preview
Smart One WAC52G
Brand: Waver Pages: 36
ADF Web AXIS HD67555 User Manual preview
AXIS HD67555
Brand: ADF Web Pages: 20
Cambium Networks PMP/PTP 450 Series Quick Start Manual preview
PMP/PTP 450 Series
Brand: Cambium Networks Pages: 155
Cambium Networks PTP 250 User Manual preview
PTP 250
Brand: Cambium Networks Pages: 228

Brands by name

Popular brands

Load more brands