manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Broadcom Boot Agent Driver Software: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/pxe.htm[9/26/2012 3:28:39 PM]

Back to Contents Page

Broadcom Boot Agent Driver Software: Broadcom NetXtreme II

Network Adapter User Guide

 

Overview

 

Setting Up MBA in a Client Environment

 

Setting Up MBA in a Server Environment

Overview

Broadcom NetXtreme II adapters support Preboot Execution Environment (PXE), Remote Program Load (RPL), iSCSI, and

Bootstrap Protocol (BootP). Multi-Boot Agent (MBA) is a software module that allows your network computer to boot with the

images provided by remote servers across the network. The Broadcom MBA driver complies with the PXE 2.1 specification and

is released with both monolithic and split binary images. This provides flexibility to users in different environments where the

motherboard may or may not have built-in base code.

The MBA module operates in a client/server environment. A network consists of one or more boot servers that provide boot

images to multiple computers through the network. The Broadcom implementation of the MBA module has been tested

successfully in the following environments:

Linux Red Hat PXE Server

. Broadcom PXE clients are able to remotely boot and use network resources (NFS mount,

and so forth) and to perform Linux installations. In the case of a remote boot, the Linux universal driver binds seamlessly

with the Broadcom Universal Network Driver Interface (UNDI) and provides a network interface in the Linux remotely-

booted client environment.

Intel APITEST

. The Broadcom PXE driver passes all API compliance test suites.

MS-DOS UNDI

. The MS-DOS Universal Network Driver Interface (UNDI) seamlessly binds with the Broadcom UNDI to

provide a network adapter driver interface specification (NDIS2) interface to the upper layer protocol stack. This allows

computers to connect to network resources in an MS-DOS environment.

Windows Deployment Service (WDS)

. To extend functionalities beyond basic network connectivity when loading an

operating system through WDS, see 

Using the NetXtreme II Monolithic Driver

.

Automated Deployment Service (ADS)

. To extend functionalities beyond basic network connectivity when loading an

operating system through ADS, see 

Using the NetXtreme II Monolithic Driver

.

Setting Up MBA in a Client Environment

Setting up MBA in a client environment involves the following steps:

1.  Enabling the MBA driver.
2.  Configuring the MBA driver.
3.  Setting up the BIOS for the boot order.

Enabling the MBA Driver

To enable or disable the MBA driver:

1.  Insert an MS-DOS 6.22 or Dell Real Mode Kernel bootable disk containing the uxdiag.exe file (for 10/100/1000-Mbps

network adapters) or uediag.exe (for 10-Gbps network adapters) in the removable disk drive and power up your system.

 NOTE: The uxdiag.exe (or uediag.exe) file is on the installation CD or in the DOS Utilities package available from

http://support.dell.com/

.

1.  Type:

uxdiag -mba [ 0-disable | 1-enable ] -c 

devnum

(or

 

uediag -mba [ 0-disable | 1-enable ] -c 

devnum)

where

devnum

 is the specific device(s) number (0,1,2, ...) to be programmed.

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

3Com TokenLink Velocity 3C319 Release Note preview
TokenLink Velocity 3C319
Brand: 3Com Pages: 2
Kontron 50099 067 User Manual preview
50099 067
Brand: Kontron Pages: 42
pivotal COMMWARE ECHO 5G How To Set Up preview
COMMWARE ECHO 5G
Brand: pivotal Pages: 2
Tenda DH301 User Manual preview
DH301
Brand: Tenda Pages: 120
Variscite VAR-EXT-CB103 Manual preview
VAR-EXT-CB103
Brand: Variscite Pages: 17
DPS KDA 864 User Manual preview
KDA 864
Brand: DPS Pages: 57
Dialogic IP Board IPT10000C Quick Install Card preview
IP Board IPT10000C
Brand: Dialogic Pages: 2
National Instruments Monochrome Image Acquisition Device NI 1410 User Manual preview
Monochrome Image Acquisition Device NI 1410
Brand: National Instruments Pages: 34
Alcatel 7750 SR-12 Installation Manual preview
7750 SR-12
Brand: Alcatel Pages: 158
Patton electronics ForeFront 2616RC Getting Started Manual preview
ForeFront 2616RC
Brand: Patton electronics Pages: 80
Sarian Systems DR 6410 Installation Manual preview
DR 6410
Brand: Sarian Systems Pages: 9
NetApp StorageGRID Webscale SG5700 Series Install preview
StorageGRID Webscale SG5700 Series
Brand: NetApp Pages: 15
B&B Electronics EIR618 Series Quick Start Manual preview
EIR618 Series
Brand: B&B Electronics Pages: 2
Advantech SmartMotion ST352 User Manual preview
SmartMotion ST352
Brand: Advantech Pages: 50
Libtor T260 Series User Manual preview
T260 Series
Brand: Libtor Pages: 43
NetApp AFF A320 Manual preview
AFF A320
Brand: NetApp Pages: 76
Frontier airi Air 4920 Quick Install Manual preview
airi Air 4920
Brand: Frontier Pages: 8
Cradlepoint MBR1200 Quick Start Manual preview
MBR1200
Brand: Cradlepoint Pages: 2

Brands by name

Popular brands

Load more brands