manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Fibre Channel Over Ethernet: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/fcoe.htm[9/26/2012 3:29:33 PM]

The WWPN is 20:00: + <FIP MAC>. For example, if the FIP MAC is 00:10:18:11:22:33, then the WWPN will be

20:00:00:10:18:11:22:33.

 NOTE: The default WWPN is 20:00: + <FIP MAC>. The default WWNN is 10:00: + <FIP MAC>.

 NOTE: In Dell FlexAddress configurations, the SAN/FIP MAC may be overridden by the blade chassis management system.

CTRL+R Method

The 

CTRL+R

 method allows you to use the boot initiator to bring up the link and login into all available fabrics and targets.

Using this method, you can ensure that the initiator is logged into the fabric/target before making provisioning changes, and

as such, can provision without manually typing in WWPNs.

1.  Configure at least one boot target through CCM as described above.
2.  Allow the system to attempt to boot through the selected initiator.
3.  Once the initiator boot starts, it will commence with DCBX sync, FIP Discovery, Fabric Login, Target Login, and LUN

readiness checks. As each of these phases completes, if the initiator is unable to proceed to the next phase, MBA will

present the option to press 

CTRL+R

.

4.  Once 

CTRL+R

 has been activated, the boot initiator will maintain a link in whatever phase has most recently succeeded

and allow you time to make the necessary provisioning corrections to proceed to the next phase.

5.  If the initiator logs into the fabric, but is unable to log into the target, a 

CTRL+R

 will pause the boot process and allow

you to configure fabric zoning.

6.  Once zoning is complete, the initiator will automatically log into all visible targets. If the initiator is unable to discover

the designated LUN on the designated target as provisioned in step 1, 

CTRL+R

 will pause the boot process and allow

you to configure selective LUN presentation.

7.  The boot initiator will periodically poll the LUN for readiness, and once the user has provisioned access to the LUN, the

boot process will automatically proceed.

 NOTE: This does not preclude the need to put the boot initiator into one-time disable mode as described in 

One-

Time Disable

.

One-Time Disable

Broadcom's FCoE ROM is implemented as Boot Entry Vector (BEV). In this implementation, the Option ROM only connects to

the target once it has been selected by BIOS as the chosen boot device. This is different from other implementations that will

connect to the boot device even if another device has been selected by the system BIOS. For OS installation over the FCoE

path, it is necessary to instruct the Option ROM to bypass FCoE and skip to CD/DVD installation media. As instructed earlier,

the boot order must be configured with Broadcom boot first and installation media second. Furthermore, during OS

installation, it is required to bypass the FCoE boot and pass through to the installation media for boot. It is required to do this

by disabling the FCoE boot ROM from booting, and not by simply allowing the FCoE ROM to attempt to boot and allowing the

BIOS to fail through and boot the installation media. Finally, it is required that the FCoE ROM successfully discover and test

the readiness of the desired boot LUN in order for installation to proceed successfully. Failure to allow the boot ROM to

discover the LUN and do a coordinated bypass will result in a failure to properly install the O/S to the LUN. In order to affect

this coordinated bypass, there are two choices:

Once the FCoE boot ROM discovers a ready target LUN, it will prompt you to press 

CTRL+D

 within 4 seconds to 

Stop

booting from the target

. Press 

CTRL+D

, and proceed to boot from the installation media.

From CCM, set the 

Option ROM

 setting under MBA settings to 

One Time Disable

. With this setting, the FCoE ROM will

load once and automatically bypass once the ready LUN is discovered. On the subsequent reboot after installation, the

option ROM will automatically revert to 

Enable

.

Wait through all option ROM banners. Once FCoE Boot is invoked, it will connect to the target, and provide a 4 second window

to press 

CTRL+D

 to invoke the bypass. Press 

CTRL+D

 to proceed to installation.

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

Barracuda Networks Network Quick Start Manual preview
Network
Brand: Barracuda Networks Pages: 2
Lanpro LP-N24 Installation Instructions preview
LP-N24
Brand: Lanpro Pages: 5
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 155
Paradyne COMSPHERE 6800 Series Communications Products Support Configuration Manual preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 44
Oracle Talari E1000 Installation Manual preview
Talari E1000
Brand: Oracle Pages: 24
Macsense MIH-108 User Manual preview
MIH-108
Brand: Macsense Pages: 39
TRENDnet TEG-S51SFP Quick Installation Manual preview
TEG-S51SFP
Brand: TRENDnet Pages: 10
ADTRAN 1700601G2 Quick Start Manual preview
1700601G2
Brand: ADTRAN Pages: 4
DPS KDA 864 User Manual preview
KDA 864
Brand: DPS Pages: 57
Dialogic IP Board IPT10000C Quick Install Card preview
IP Board IPT10000C
Brand: Dialogic Pages: 2
Sharedband Power Router 2 Configuration Manual preview
Power Router 2
Brand: Sharedband Pages: 3
Corsair ELITE LCD UPGRADE KIT Manual preview
ELITE LCD UPGRADE KIT
Brand: Corsair Pages: 11
Intellinet 560665 User Manual preview
560665
Brand: Intellinet Pages: 32
ZyXEL Communications P-660R-F1 series User Manual preview
P-660R-F1 series
Brand: ZyXEL Communications Pages: 268

Brands by name

Popular brands

Load more brands