manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Windows Driver and Application Installation: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/umwindrv.htm[9/26/2012 3:28:57 PM]

1.  Locate [Manufacturer] header within the file.
2.  Review the line below it which reads: %brcm% = broadcom, ntx86, ntamd64, ntia64 or equivalent.
3.  Modify that line to read: %brcm% = broadcom.ntx86, ntamd64, ntia64. The change made replaces the comma and

space after "broadcom" with a period.

4.  Save the file.
5.  Restart the RIS service (binlsvc) or WDS services (wdsserver).

Inserting the NetXtreme II Monolithic Driver in a WinPE 2.0 Image

The Microsoft Windows Server 2008 method of inserting the NetXtreme II monolithic driver in a WinPe 2.0 image is different

from the Windows Server 2008 R2 method, as discussed below.

By default, the monolithic driver is not included in the boot.wim and install.wim files that come with either the Microsoft

Windows Server 2008 CD or the Windows Server 2008 R2 CD. Microsoft's Windows Automated Installation Kit (AIK) allows

you to modify the default boot.wim and install.wim files, and create WinPE 2.0 images to include the NetXtreme II monolithic

driver in the Windows Server installation.

To insert the monolithic driver into a WinPE 2.0 boot image (Windows Server 2008)

To insert Broadcom's NetXtreme II monolithic driver in a WinPE 2.0 image, download AIK from

http://www.microsoft.com/download/en/default.aspx and install

.

After installing AIK, copy the latest monolithic driver to a directory on the local hard drive of the system you installed the AIK.

Follow the procedure below to insert the monolithic driver into a WinPE 2.0 boot image.

1.  From All Programs, open Windows AIK and select 

Windows PE Tools Command prompt.

2.  At the command prompt, run the copype.cmd script. The script requires two arguments: hardware architecture and

destination location.

copype.cmd  <arch> <destination>

For example: 

copype x86 c:\VistaPEx86

 NOTE: The directory structure c:\VistaPEx86 is used throughout this procedure.

3.  Mount the base image to a local directory so that you can add or remove packages by typing:

imagex /mountrw c:\VistaPEx86\winpe.wim 1 c:\VistaPEx86\mount

4.  Place the monolithic driver and inf file in c:\drivers\x32\ by typing:

peimg  /inf=c:\Drivers\x32\b06nd.inf c:\VistaPEx86\mount\windows

AIK inserts the driver into the WinPE 2.0 image.

5.  To complete the customization of the image, prepare the image for deployment, type:

peimg  /prep  c:\VistaPEx86\mount\windows

6.  When asked to continue and have the program prepare the image for deployment, type:

yes

7.  To commit the changes to the original image file (Winpe.wim), type:

imagex /unmount c:\VistaPEx86\mount /commit

8.  To replace the default Boot.wim file in the \ISO directory with your new custom image, type:

copy c:\VistaPex86\winpe.wim c:\VistaPEx86\ISO\sources\boot.wim

To add a device driver to an offline Windows PE image (Windows Server 2008 R2)

This procedure demonstrates how to use the Deployment Image Servicing and Management (DISM) tool to add a device

driver (.inf) to an offline Windows PE image. Before running a DISM command, first mount the Windows PE image.

1.  Mount the base image by using the DISM tool to a local Windows PE directory. For example:

Dism /Mount-WIM /WimFile:c:\winpe_x86\winpe.wim /index:1 /MountDir:c:\winpe_x86\mount

 NOTE: The directory structure c:\winpe_x86 is used throughout this procedure.

2.  Add the .inf file to the base image by using the 

dism

 command with the 

/Add-Driver

 option. For example Driver.inf is

the Broadcom driver, evnd.inf is the driver for the 10 Gbps devices, and b06nd.inf is the driver for the 1 Gbps devices.

Dism /image:<path_to_image> /Add-Driver /Driver:c:\winpe_x86\mount\Windows\driver.inf

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

D-Link DSL-2740B Installation Manual preview
DSL-2740B
Brand: D-Link Pages: 10
D-Link DI-106 Series Faq preview
DI-106 Series
Brand: D-Link Pages: 29
D-Link DGS-3700 Series User Manual preview
DGS-3700 Series
Brand: D-Link Pages: 292
D-Link DGS-3224SR User Manual preview
DGS-3224SR
Brand: D-Link Pages: 140
D-Link DGS-1224T - Web Smart Switch User Manual preview
DGS-1224T - Web Smart Switch
Brand: D-Link Pages: 61
D-Link DI-LB604 - Load Balancing Router Quick Installation Manual preview
DI-LB604 - Load Balancing Router
Brand: D-Link Pages: 14
D-Link DIR-605L Specification preview
DIR-605L
Brand: D-Link Pages: 2
D-Link DIR-510L Manual preview
DIR-510L
Brand: D-Link Pages: 45
D-Link DES-3550 Manual preview
DES-3550
Brand: D-Link Pages: 218
D-Link DES-3528 - xStack Switch - Stackable User Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 322
D-Link DIR-130 - Broadband VPN Router How To Set Up preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 10
D-Link DIR-130 - Broadband VPN Router Troubleshooting Manual preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 4
D-Link DIR-130 - Broadband VPN Router Configuration preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 13
D-Link DIR Series Configuration Manual preview
DIR Series
Brand: D-Link Pages: 13
D-Link DI-804HV - Express ENwork Router Configuration Manual preview
DI-804HV - Express ENwork Router
Brand: D-Link Pages: 19
D-Link DI-808HV Quick Installation Manual preview
DI-808HV
Brand: D-Link Pages: 12
D-Link DI-804 Quick Install Manual preview
DI-804
Brand: D-Link Pages: 8
D-Link DI-604UP Quick Install Manual preview
DI-604UP
Brand: D-Link Pages: 16

Brands by name

Popular brands

Load more brands