manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, User Manual

The Dell Broadcom NetXtreme Family of Adapters is a high-performance network adapter series that ensures fast and reliable connectivity for your Dell computers. To enhance your user experience, a comprehensive User Manual is available for free download from our website, manualshive.com. Get all the information you need to maximize the features of your adapter effortlessly.

Share
Download
background image

Using Broadcom Advanced Control Suite 4: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/bacs.htm[9/26/2012 3:29:48 PM]

The number of connection timeout errors for the named session.

Format errors

The number of errors due to inconsistent fields, reserved fields not 0, non-existent LUN, etc. for the named session.

IEEE 802.3 Statistics

Frames Rx with Alignment Error

A count of the frames that were not an integral number of octets in length and do not pass the FCS check. This counter is

incremented when the receive status is reported as Alignment Error.

Frames Tx with one Collision

A count of the frames that were involved in a single collision and were subsequently transmitted successfully. This counter is

incremented when the result of a transmission is reported as Transmit OK, and the attempt value is 2.

Frames Tx with more than one Collision

A count of the frames that were involved in more than one collision and were subsequently transmitted successfully. This counter is

incremented when the transmit status is reported as Transmit OK, and the value of the attempts variable is greater than 2 and less

than or equal to the attempt limit.

Frames Tx after Deferral

A count of the frames that were delayed being transmitted on the first attempt because the medium was busy. The frames involved

in any collision are not counted.

Custom Statistics

 NOTE: Custom statistics are available only for an enabled Broadcom network adapter.

Out of Recv. Buffer

The number of times the adapter ran out of Receive Buffer Descriptors. This information is only available for Broadcom NetXtreme II

adapters.

Frames size less than 64-byte with bad FCS

The number of frames with a size less than 64 bytes with bad FCS.

MAC Rx w/ Pause Command and Length = 0

MAC control frames with the pause command and a length equal to 0.

MAC Rx w/ Pause Command and Length greater than 0

MAC control frames with the pause command and a length greater than 0.

MAC Rx w/ no Pause Command

MAC control frames with no pause command.

MAC Sent X-on

MAC Transmit with X-on was on.

MAC Sent X-off

MAC Transmit with X-on was off.

Large Send Offload Transmit Requests

The number of times the adapter was requested to transmit a packet performing TCP segmentation.

Total Offload TCP Connections

The total number of offloaded TCP connections.

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Reviews:

No comments

Related manuals for Broadcom NetXtreme Family of Adapters

Sagem 2604 Quick Installation Manual preview
2604
Brand: Sagem Pages: 19
Magnat Audio MC 200 Faq preview
MC 200
Brand: Magnat Audio Pages: 2
LORD AP5103 Series Technical Manual preview
AP5103 Series
Brand: LORD Pages: 9
Dahua NVR2104-S2 Quick Start Manual preview
NVR2104-S2
Brand: Dahua Pages: 6
Intellinet 523318 Instructions preview
523318
Brand: Intellinet Pages: 2
Hirschmann OCTOPUS 5TX-EEC Description And Operating Instructions preview
OCTOPUS 5TX-EEC
Brand: Hirschmann Pages: 6
ZyXEL Communications XGS4700 Series Manual preview
XGS4700 Series
Brand: ZyXEL Communications Pages: 485
IndigoVision Compact NVR-AS 4000 User Manual preview
Compact NVR-AS 4000
Brand: IndigoVision Pages: 38
ZoneVu ZSI-450-IP Installation Manual & User Manual preview
ZSI-450-IP
Brand: ZoneVu Pages: 15
Tripp Lite N201-001-BL Specification Sheet preview
N201-001-BL
Brand: Tripp Lite Pages: 3
G&D DVI-Vision-IP-Fiber Installation And Operation Manual preview
DVI-Vision-IP-Fiber
Brand: G&D Pages: 240
ZyXEL Communications GS1100-10HP User Manual preview
GS1100-10HP
Brand: ZyXEL Communications Pages: 30
Tripp Lite N002-025-GY Specification Sheet preview
N002-025-GY
Brand: Tripp Lite Pages: 3
XtendLan XL-GRT402S User Manual preview
XL-GRT402S
Brand: XtendLan Pages: 54
Matrix Switch Corporation MSC-CP32X1E Product Manual preview
MSC-CP32X1E
Brand: Matrix Switch Corporation Pages: 48
BinTec BIANCA/BRICK XS Quick Install Manual preview
BIANCA/BRICK XS
Brand: BinTec Pages: 2
Aegis AVP-DE1K-100 User Manual preview
AVP-DE1K-100
Brand: Aegis Pages: 7
Johnson Controls IQ WiFi 6 Installation Manual preview
IQ WiFi 6
Brand: Johnson Controls Pages: 55

Brands by name

Popular brands

Load more brands