Dell Broadcom NetXtreme Family of Adapters User Manual Download Page 179

Page: 179 / 224

Using Broadcom Advanced Control Suite 4: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/bacs.htm[9/26/2012 3:29:48 PM]

additional VLANs.

NOTE: You can define up to 64 VLANs per team (63 VLANs that are tagged and 1 VLAN that is not tagged). Adding several

VLANS may slow down the reaction time of the Windows interface due to memory and processor time usage for each VLAN.

The degree to which Windows performance may suffer depends on system configuration.

18. To apply and commit the changes to the team, select

Commit changes to system and Exit the wizard

. To apply your

changes but continue using the wizard, select

Save changes and continue to manage more teams

. Click Finish.

Summary of Contents for Broadcom NetXtreme Family of Adapters

































































































































































































































Search results

Summary of Contents for Broadcom NetXtreme Family of Adapters

Reviews:

Related manuals for Broadcom NetXtreme Family of Adapters

Brands by name

Popular brands

Dell Broadcom NetXtreme Family of Adapters, User Manual

Search results

Summary of Contents for Broadcom NetXtreme Family of Adapters

Reviews:

Related manuals for Broadcom NetXtreme Family of Adapters

Brands by name

Popular brands