Dell Aurora R6, Service Manual

Page: 111 / 164

Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Align and snap the optical-drive bezel to the optical drive.
2 Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
3 Replace the screw that secures the optical-drive bracket to the optical drive.
4 Lift the securing tab and slide the optical-drive assembly through the front of
the computer until the securing tab snaps into place.
5 Connect the data and power cables to the optical drive.
Post-requisites
1 Follow the procedure from step 10 to step 11 in " Replacing the power-supply
unit ".
2 Replace the left-side cover .
111