manualshive.com logo in svg

Dell Aurora R6, Service Manual, Page: 140 / 164

Share
Download
Dell Aurora R6 Service Manual Download Page 140

Technology and components

Audio

Alienware Aurora R5

is shipped with Realtek ALC3861 for optical S/PDIF 

output.

NOTE: The audio drivers are already installed when you receive your 
computer.

Downloading the audio driver

1 

Turn on your computer.

2 

Go to 

www.dell.com/support

.

3 

Click 

Product support

, enter the Service Tag of your computer and then 

click 

Submit

.

NOTE: If you do not have the Service Tag, use the auto-detect 
feature or manually browse for your computer model.

4 

Click 

Drivers & downloads

 → 

Find it myself

.

5 

Scroll down the page and expand 

Audio

.

6 

Click 

Download

 to download the audio driver for your computer.

7 

After the download is complete, navigate to the folder where you saved the 
audio driver file.

8 

Double-click the audio driver file icon and follow the instructions on the 
screen to install the driver.

Identifying the audio controller

1 

On the taskbar, click the search box, and then type 

Device Manager

.

2 

Click 

Device Manager

.

The 

Device Manager

 window is displayed.

140

Summary of Contents for Aurora R6





































































































































































Reviews:

No comments