Dell Aurora R6 Service Manual Download Page 134

Page: 134 / 164

Table 7. System setup options—Boot menu

Boot

Boot List Option

Displays the available boot devices.

File Browser Add Boot Option

Allows you to set the boot path in
the boot option list.

File Browser Del Boot Option

Allows you to delete the boot path in
the boot option list.

Secure Boot Control

Allows you to enable or disable the
secure boot control.

Load Legacy OPROM

Allows you to enable or disable the
Legacy Option ROM.

Boot Option Priorities

Displays the available boot devices.

Boot Option #1

Displays the first boot device.
Default: UEFI: Windows Boot
Manager.

Boot Option #2

Displays the second boot device.
Default: Onboard NIC Device.

Boot Option #3

Displays the third boot device.
Default: Onboard NIC Device.

Table 8. System setup options—Exit menu

Save & Exit

Save Changes and Reset

Allows you to exit system setup and
save your changes.

Discard Changes and Reset

Allows you to exit system setup and
load previous values for all system
setup options.

Restore Defaults

Allows you to load default values for
all system setup options.

Discard Changes

Allows you to exit your changes.

Save Changes

Allows you to save your changes.

134

Summary of Contents for Aurora R6





































































































































































Search results

Summary of Contents for Aurora R6

Reviews:

Related manuals for Aurora R6

Brands by name

Popular brands

Dell Aurora R6, Service Manual

Search results

Summary of Contents for Aurora R6

Reviews:

Related manuals for Aurora R6

Brands by name

Popular brands