Dell Alienware M14x R2 Owner'S Manual Download Page 75

Page: 75 / 104

Mini-Card Board

Mini-Card Board

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 11. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Removing the Mini-Card Board

Prerequisites

Remove the base cover. See "Removing the Base Cover" on page 15.

Remove the battery. See "Removing the Battery" on page 17.

Remove the mini-card(s). See "Removing the Mini-Card(s)" on page 45.

Remove the center-control cover.

See "Removing the Center-Control Cover" on page 33.

Remove the keyboard. See "Removing the Keyboard" on page 37.

Remove the palm-rest assembly.

See "Removing the Palm-Rest Assembly" on page 41.

Summary of Contents for Alienware M14x R2









































































































Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands

Dell Alienware M14x R2, Owner'S Manual

Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands