Dell Alienware M14x R2 Owner'S Manual Download Page 53

Page: 53 / 104

Status-Lights Board

Remove the screw that secures the status-light board to the palm-

rest assembly.

Carefully lift the status-light board and release its cable from the slot on

the palm-rest assembly.

Replacing the Status-Lights Board

Procedure.

Slide the status-light board cable through the slot in the

palm-rest assembly.

Align the slot on the status-light board with the alignment post on the

palm-rest assembly.

Replace the screw that secures the status-light board to the

palm-rest assembly.

Turn the palm-rest assembly over.

Route the status-light board cable through the routing guides on the

palm-rest assembly.

status-light board

screw

Summary of Contents for Alienware M14x R2









































































































Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands

Dell Alienware M14x R2, Owner'S Manual

Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands