Dell Alienware M14x R2 Owner'S Manual Download Page 74

Page: 74 / 104

Display Assembly

Replacing the Display Assembly

Procedure

Slide the WirelessHD (optional) and mini-card antenna cables through

the slot on the computer base.

Place the display assembly in position and replace the screws that secure

the display assembly to the computer base.

NOTE:

Ensure that no cables lie between the display assembly and the computer

base.

Connect the display cable and the logo-board cable to the connectors on

the system board.

Postrequisites

Replace the palm-rest assembly.

See "Replacing the Palm-Rest Assembly" on page 44.

Replace the keyboard. See "Replacing the Keyboard" on page 39.

Replace the center-control cover.

See "Replacing the Center-Control Cover" on page 35.

Turn the computer over and route the WirelessHD card and mini-card

antenna cables through the routing guides on the computer base.

Connect the Mini-Card antenna cables to the mini-card(s).

See "Replacing the Mini-Card(s)" on page 47.

Replace the battery. See "Replacing the Battery" on page 18.

Replace the base cover. See "Replacing the Base Cover" on page 16.

Follow the instructions in "After Working Inside Your Computer" on page13.

Summary of Contents for Alienware M14x R2









































































































Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands

Dell Alienware M14x R2, Owner'S Manual

Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands