Dell Alienware M14x R2 Owner'S Manual Download Page 45

Page: 45 / 104

Wireless Mini-Card(s)

Slide and remove the mini-card out of the connector on the system board.

Replacing the Mini-Card(s)

Procedure

Remove the new Mini-Card from its packaging.

CAUTION:

Use firm and even pressure to slide the mini-card into place. If you use

excessive force, you may damage the connector.

CAUTION:

The connectors are keyed to ensure correct insertion. If you feel

resistance, check the connectors on the mini-card and on the system board, and
realign the mini-card.

Insert the mini-card connector at a 45-degree angle into the connector on

the system board.

Press the other end of the mini-card down into the slot on the

system board and replace the screw that secures the mini-card to

the system board.

Summary of Contents for Alienware M14x R2









































































































Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands

Dell Alienware M14x R2, Owner'S Manual

Search results

Summary of Contents for Alienware M14x R2

Reviews:

Related manuals for Alienware M14x R2

Brands by name

Popular brands