Dell 9200 Owner'S Manual Download Page 50

Page: 50 / 174

Solving Problems

Drive Problems

CAUTION:

Before you perform any of the procedures in this section, follow the safety instructions in the

Product

Information Guide

CD and DVD drive problems

NOTE:

High-speed CD or DVD drive vibration is normal and may cause noise. This does not indicate a defect in the

drive or the CD or DVD.

NOTE:

Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives.

NSURE

THAT

ICROSOFT®

INDOWS®

RECOGNIZES

THE

DRIVE

—

Click

Start

, then click

Computer

. If the floppy, CD, or DVD drive, is not listed, perform a full scan with your antivirus

software to check for and remove viruses. Viruses can sometimes prevent Windows from recognizing
the drive.

EST

THE

DRIVE

—

• Insert another floppy, CD, or DVD to eliminate the possibility that the original is defective.
• Insert a bootable floppy and restart the computer.

LEAN

THE

DRIVE

DISK

—

See "Cleaning Your Computer" on page 34.

HECK

THE

CABLE

CONNECTIONS

THE

ARDWARE

ROUBLESHOOTER

—

See "Using Microsoft

Windows XP System Restore" on

page 72.

THE

ELL

IAGNOSTICS

—

See "Dell Diagnostics" on page 68.

DJUST

THE

INDOWS

VOLUME

CONTROL

—

• Click the speaker icon in the lower-right corner of your screen.
• Ensure that the volume is turned up by clicking the slidebar and dragging it up.
• Ensure that the sound is not muted by clicking any boxes that are checked.

HECK

THE

SPEAKERS

AND

SUBWOOFER

—

See "Sound and Speaker Problems" on page 61.

DIM_book.book Page 50 Monday, October 15, 2007 11:04 AM

Summary of Contents for 9200















































































































































































Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands

Dell 9200, Owner'S Manual

Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands