Dell 9200 Owner'S Manual Download Page 112

Page: 112 / 174

112

Removing and Installing Parts

When you restart your computer, enter system setup (see "System Setup" on page 127). Then, go the
the "

Diskette Drive

" section of the BIOS and under

Diskette Drive

set the value to "

Internal

only

See the documentation that came with the floppy drive for instructions on installing any software
required for the operation of the drive.

Enter system setup (see "System Setup" on page 127) and select the appropriate

Diskette Drive

option.

Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 68).

Media Card Reader

For information on using the Media Card Reader, see "Using a Media Card Reader (Optional)" on
page 31.

Removing a Media Card Reader

CAUTION:

Before you perform any of the procedures in this section, follow the safety instructions in the

Product

Information Guide

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your

body before you touch any of your computer’s electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.

Follow the procedures in "Before You Begin" on page 77.

Lay the computer on its side so that the system board is on the bottom of the inside of the computer.

Remove the computer cover (see "Removing the Computer Cover" on page 78).

Remove the drive panel (see "Removing the Drive Panel" on page 100).

DIM_book.book Page 112 Monday, October 15, 2007 11:04 AM

Summary of Contents for 9200















































































































































































Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands

Dell 9200, Owner'S Manual

Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands