Dell 9200 Owner'S Manual Download Page 41

Page: 41 / 174

Optimizing Performance

Creating a RAID Level 1 Configuration

Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on
page 39).

Press <Ctrl><i> when you are prompted to enter the Intel RAID Option ROM utility.

Use the up- and down-arrow keys to highlight

Create RAID Volume

, then press <Enter>.

Enter a RAID volume name or accept the default name, then press <Enter>.

Use the up- and down-arrow keys to select

RAID1 (Mirror)

, then press <Enter>.

If there are more than two hard drives available, press the up- and down-arrow keys and spacebar to
select the two drives you want to use to make up your volume, then press <Enter>.

Select the desired capacity for the volume, then press <Enter>.

The default value is the maximum available size.

Press <Enter> to create the volume.

Press <y> to confirm that you want to create the RAID volume.

Confirm that the correct volume configuration is displayed on the main Intel RAID Option ROM
utility screen.

Use the up- and down-arrow keys to select

Exit

, and then press <Enter>.

Install the operating system (see "Using Microsoft

Windows XP System Restore" on page 72).

Deleting a RAID Volume

NOTICE:

The following procedure will result in the loss of all data on the hard drives in your RAID configuration.

Back up any data you want to keep before continuing.

NOTICE:

If your computer currently boots to RAID and you delete the RAID volume in the Intel RAID Option ROM

utility, your computer will become unbootable.

Press <Ctrl><i> when you are prompted to enter the Intel RAID Option ROM utility.

Use the up- and down-arrow keys to highlight

Delete RAID Volume

, then press <Enter>.

Use the up- and down-arrow keys to highlight the RAID volume you want to delete, then press
<Delete>.

Press <y> to confirm the deletion of the RAID volume.

Press <Esc> to exit the Intel RAID Option ROM utility.

DIM_book.book Page 41 Monday, October 15, 2007 11:04 AM

Summary of Contents for 9200















































































































































































Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands

Dell 9200, Owner'S Manual

Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands