Dell 9200 Owner'S Manual Download Page 132

Page: 132 / 174

132

Appendix

Boot Sequence

This feature allows you to set the order in which the BIOS will search devices when trying to find an
operating system.

NOTICE:

If you modify any boot sequence settings, save the new settings to avoid losing the changes.

Option Settings

NOTE:

The computer attempts to boot from all bootable devices, but if no bootable device is found, the computer

generates an error message that states

No boot device available

. Press the <F1> key to retry the boot,

or press the <F2> key to enter the setup utility.

•

Onboard or USB Floppy Drive —

The computer attempts to boot from the floppy drive. If there is no

floppy in the drive or there is no floppy drive installed, the computer attempts to boot from the next
bootable device in the sequence.

NOTE:

If there is a non-bootable floppy in the drive, the computer generates an error message. Follow the

on-screen instructions to retry the boot.

•

Onboard SATA Hard Drive

— The computer attempts to boot from the primary hard drive. If no

operating system is on the drive, the computer attempts to boot from the next bootable device.

Maintenance

Service Tag

Displays the system service tag which is a unique seven-digit alphanumeric
system identifier.

SERR Message

Controls SERR message mechanism to support some add-in cards.

Load Defaults

Allows you to reset all options in the setup menu to the factory default.

Event Log

Displays the system event log.

POST Behavior

Fastboot

When set to

(default), your computer starts more quickly because it skips

certain configurations and tests.

Numlock Key

This option involves the rightmost bank of keys on your keyboard. When set
to

(default), this option activates the numeric and mathematical features

shown at the top of each key. When set to

Off

, this option activates the

cursor-control functions labeled on the bottom of each key.

POST Hotkeys

This option allows you to specify the function keys to display on the screen
when the computer starts.

Keyboard Errors

This option disables or enables keyboard error reporting when the computer
starts.

DIM_book.book Page 132 Monday, October 15, 2007 11:04 AM

Summary of Contents for 9200















































































































































































Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands

Dell 9200, Owner'S Manual

Search results

Summary of Contents for 9200

Reviews:

Related manuals for 9200

Brands by name

Popular brands