manualshive.com logo in svg

Dell EMC PowerVault MD 3400, Administrator'S Manual

Share
Download
Dell EMC PowerVault MD 3400 Administrator'S Manual Download Page 134

If you disable the snapshot virtual disk or consistency group snapshot virtual disk, the system performs the following actions:

•

Retains the World-Wide Name (WWN) for the snapshot virtual disk or consistency group snapshot virtual disk.

•

Retains the snapshot virtual disk or consistency group snapshot virtual disk’s association with the same base virtual disk.

•

Retains the snapshot virtual disk or consistency group snapshot virtual disk’s associated repository—if the virtual disk is designated as 

read-write.

•

Retains any host mapping and access (any read-write requests fail).

•

Removes the snapshot virtual disk or consistency group snapshot virtual disk’s association with the current snapshot image.

•

For a consistency group snapshot virtual disk, disables each member’s snapshot virtual disk.

NOTE: 

If you are finished with the snapshot virtual disk or consistency group snapshot virtual disk and do not intend to re-create 

it later, you must delete the virtual disk, instead of disabling it.

1 

From the AMW, select the 

Storage & Copy Services

 tab.

2 

Select the snapshot virtual disk or consistency group snapshot virtual disk that you want to disable and then select one of the 
following:
•

Copy Services

 > 

Snapshot Virtual disk 

> 

Disable.

 The 

Confirm Disable Snapshot Virtual Disk

 window is displayed.

•

Copy Services

 > 

Consistency Group Snapshot Virtual Disk

 > 

Disable.

 The 

Confirm Disable Consistency Group Snapshot 

Virtual Disk

 window is displayed.

3 

Type 

yes

 in the text box and then click 

Disable

 to disable the snapshot virtual disk.

The snapshot virtual disk or consistency group snapshot virtual disk is displayed in the Logical pane with the 

Disabled Snapshot sta

tus 

icon. If you disabled a read-write snapshot virtual disk or consistency group snapshot virtual disk, its associated snapshot repository 
virtual disk does not change status. The write activity to the snapshot repository virtual disk stops until the snapshot virtual disk or 
consistency group snapshot virtual disk is re-created.

Re-creating a Snapshot Virtual Disk or consistency group 
Snapshot Virtual Disk

Use the 

Re-Create

 option when you want to re-create a snapshot virtual disk or consistency group snapshot virtual disk that you 

previously disabled. Re-creating a snapshot virtual disk or consistency group snapshot virtual disk takes less time than creating a new one.
If you have a snapshot virtual disk or consistency group snapshot virtual disk that you no longer need, you can reuse it (and any associated 
snapshot repository virtual disk), instead of deleting it, to create a different snapshot virtual disk or consistency group snapshot virtual disk 
of the same base virtual disk. You can re-associate the snapshot virtual disk or consistency group snapshot virtual disk with the same 
snapshot image or a different snapshot image as long as the snapshot image is in the same base virtual disk.

NOTE: 

If the snapshot virtual disk or consistency group snapshot virtual disk is part of an online copy relationship, you cannot 

perform the Re-create option on the virtual disk.

Keep these important guidelines in mind when you re-create a snapshot virtual disk or consistency group virtual disk:

•

The snapshot virtual disk or consistency group snapshot virtual disk must be in either an 

Optimal

 status or 

Disabled

 status.

•

For consistency group snapshot virtual disk, all member snapshot virtual disks must be in a Disabled state before you can re-create the 

consistency group snapshot virtual disk.

•

You cannot re-create an individual member snapshot virtual disk, you can re-create only the overall consistency group snapshot virtual 

disk.

•

All write data on any associated snapshot repository virtual disk is deleted. Snapshot virtual disk or consistency group snapshot virtual 

disk parameters remain the same as the previously disabled virtual disk parameters. The original names for the snapshot virtual disk or 

consistency group snapshot virtual disk are retained. You can change these names after the re-create option completes.

To re-create a snapshot virtual disk or consistency group snapshot virtual disk:

1 

From the AMW, select the 

Storage & Copy Services

 tab.

2 

Select the snapshot virtual disk or consistency group snapshot virtual disk that you want to disable and then select one of the 
following:
•

Copy Services

 > 

Snapshot Virtual disk 

> 

Re-create.

 The 

Confirm Re-Create Snapshot Virtual Disk

 window is displayed.

134

Premium feature—Snapshot Virtual Disk

Summary of Contents for PowerVault MD 3400


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands