manualshive.com logo in svg

Dell EMC PowerVault MD 3400, Administrator'S Manual

Share
Download
Dell EMC PowerVault MD 3400 Administrator'S Manual Download Page 124

9 

Click 

Finish

.

Renaming a consistency group

Use the 

Rename Consistency Group

 option to change the name of the consistency group when the current name is no longer meaningful 

or applicable.
Keep these guidelines in mind when you name a consistency group:

•

A name can consist of letters, numbers, and the special characters underscore (_), hyphen (-), and pound (#). If you choose any other 

characters, an error message is displayed. You are prompted to choose another name.

•

Limit the name to 30 characters. Any leading and trailing spaces in the name are deleted.

•

Use a unique, meaningful name that is easy to understand and remember.

•

Avoid arbitrary names or names that would quickly lose their meaning in the future.

•

If you try to rename a consistency group with a name that is already in use by another consistency group, an error message is displayed, 

and you are prompted to choose another name for the group.

To rename a consistency group:

1 

From the AMW, select the 

Storage & Copy Services

 tab.

2 

Select the consistency group that you want to rename and then select 

Copy Services

 > 

Consistency Group

 > 

Rename.

The 

Rename Consistency Group

 window is displayed.

3 

Type a new name for the consistency group and then click 

Rename

.

Deleting consistency group

Use the 

Delete Consistency Group

 option to delete a consistency group.

The system deletes the following when a consistency group is deleted:

•

All existing snapshot images from the consistency group.

•

All existing snapshot virtual disks from the consistency group.

•

All the associated snapshot images that exist for each member virtual disk in the consistency group.

•

All the associated snapshot virtual disks that exist for each member virtual disk in the consistency group.

•

All associated repositories that exist for each member virtual disk in the consistency group—if selected.

To delete a consistency group:

1 

From the AMW, select the 

Storage & Copy Services

 tab.

2 

Select the consistency group that you want to delete and then select 

Copy Services

 > 

Consistency Group

 > 

Delete.

The 

Confirm Delete

 window is displayed.

3 

Select 

Delete all repositories associated with this consistency group

 if you want to delete the associated repository that exists for 

the consistency group.

4 

Type 

yes

 in the text box and then click 

Delete

 to delete the consistency group.

Changing the settings of a consistency group

Use the 

Change Consistency Group Settings

 option to modify the auto-delete settings and the consistency group repository settings that 

were configured when you created the consistency group.

•

Auto-Delete Settings

 — You can configure each consistency group to keep the total number of snapshot images in the group at or 

below a user-defined maximum. When this option is enabled, the system automatically deletes the oldest snapshot image in the group, 

any time a new snapshot is created, to comply with the maximum number of snapshot images allowed for the group.

•

Consistency Group Repository Settings

 — You can define a maximum percentage for the consistency group member repository that 

determines when a warning is triggered when the capacity of a consistency group member repository reaches the defined percentage. 

124

Premium feature—Snapshot Virtual Disk

Summary of Contents for PowerVault MD 3400


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands