manualshive.com logo in svg

Dell EMC PowerVault MD 3400, Administrator'S Manual

Share
Download
Dell EMC PowerVault MD 3400 Administrator'S Manual Download Page 131

•

Copy Services

 > 

Snapshot Virtual disk

 > 

Rename.

 The 

Rename Snapshot Virtual Disk

 window is displayed.

•

Copy Services

 > 

Consistency Group Snapshot Virtual Disk

 > 

Rename.

 The 

Rename Consistency Group

 window is displayed.

3 

Type a new name for the snapshot virtual disk or consistency group snapshot virtual disk and then click 

Rename

.

Creating consistency group Snapshot Virtual Disk

A consistency group snapshot virtual disk comprises multiple snapshot virtual disks to provide host access to a snapshot image that has 
been taken for each selected member virtual disk at the same moment in time. The consistency group snapshot virtual disk can be 
designated as either read-only or read-write. Read-write consistency group snapshot virtual disks require a repository for each member 
virtual disk that you select in the wizard to save any subsequent modifications made by the host application to the base virtual disk without 
affecting the referenced snapshot image. Each member repository is created at the same time the consistency group snapshot virtual disk 
is created.
The following guidelines apply:

•

The Snapshot premium feature must be enabled on the storage array.

•

The consistency group must contain at least one member virtual disk before you can create a consistency group snapshot virtual disk.

•

There is a maximum allowable limit to the number of snapshot images for a consistency group—depending on your configuration.

•

You cannot create a snapshot virtual disk of a failed virtual disk.

•

Snapshot virtual disk repositories are fully resizeable. If you have the storage capacity, you can increase the size of the snapshot 

repository to avoid a repository full message. Conversely, if you find that the snapshot virtual disk repository is larger than you need, you 

can reduce its size to free up space that is needed by other logical virtual disks.

NOTE: 

If you attempt to create a snapshot virtual disk for a snapshot image and that snapshot image is in a pending snapshot 

image creation operation, it is due to the following conditions:

•

The base virtual disk that contains this snapshot image is a member of an asynchronous remote replication group

•

The base virtual disk is in a synchronizing operation. The snapshot image is created when the synchronization operation is 

completed.

To create a consistency group snapshot virtual disk:

1 

From the AMW, select the 

Storage & Copy Services

 tab.

2 

Do one of the following:
•

Select a consistency group, and then select 

Copy Services

 > 

Consistency Group

 > 

Create Consistency Group Snapshot Virtual 

Disk.

 The 

Select Existing Snapshot Image or New Snapshot Image

 window is displayed. Go to step 3.

•

Select a consistency group snapshot image from the 

Consistency Group Snapshot Images

 table, and then select 

Copy Services 

> 

Consistency Group Snapshot Image

 > 

Create Consistency Group Snapshot Virtual Disk.

 The 

Consistency Group Snapshot 

Virtual Disk Settings

 window is displayed. Go to step 4.

3 

If you selected a consistency group in step 2, select the consistency group snapshot image for which you want to create a snapshot 
virtual disk. Do one of the following:
•

Select 

An existing snapshot image

 and then select a snapshot image from the consistency group snapshot images table and click 

Next

.

•

Select 

A new snapshot image

 and then a snapshot group from the existing snapshot group table and then click 

Next

.

The 

Consistency Group Snapshot Virtual Disk Settings

 window is displayed.

4 

In the 

Consistency group snapshot virtual disk name

 field, enter a unique name (30 character maximum) that best describes the 

consistency group selected for this snapshot image. For example, AccountingData.
By default, the consistency group snapshot virtual disk name is shown in the name text box as:

[consistency-group-name] - 

SV + sequence-number

 where SV (snapshot virtual disk) is the appended suffix and sequence-number is the chronological 

number of the snapshot virtual disk relative to the consistency group.
For example, if you create the first snapshot virtual disk for a consistency group called “Accounting”, then the default name of the 
snapshot virtual disk is “Accounting_SV_01”. The default name of the next snapshot virtual disk you create based on “Accounting” is 
“Accounting_SV_02”.

Premium feature—Snapshot Virtual Disk

131

Summary of Contents for PowerVault MD 3400


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands