Recommended tools
You need the following tools to perform the removal and installation procedures:
•
Key to the bezel lock
The key is required only if your system includes a bezel.
•
Phillips #1 screwdriver
•
Phillips #2 screwdriver
•
Torx #T20 screwdriver
•
1/4 inch flat head screwdriver
•
Wrist grounding strap
Optional front bezel
An optional metal bezel is mounted on the front of the system. The front bezel displays the system branding. A lock on the bezel is used to
protect unauthorized access to the drives. There are two versions of bezel available:
•
With LCD panel
•
Without LCD panel
For bezels with LCD panel, the system status can be viewed on the LCD panel. For more information, see the
section.
Removing the front bezel
The procedure to remove the front bezel with and without the LCD panel is the same.
Prerequisite
Follow the safety guidelines listed in
Steps
1
Unlock the bezel by using the bezel key.
2
Press the release button, and pull the left end of the bezel.
3
Unhook the right end, and remove the bezel.
Installing and removing system components
57