Del Medical EPEX Omniflex IV, Service Manual

Page: 96 / 238

EPEX/Omniflex IV System Service Manual
4-12 Adjustments and Calibration
The following is an example of the Outputs screen.
The grey stripes mean that the function is not enabled/inactive. The red
stripes mean that the function is enabled/active.
The arrow in the lower middle area points to one of the five states
described below. Moving to the next state is accomplished by pressing the
State button. The states are described in the following table.
State Description
STANDBY Sets state of the I/O when the Generator is in
standby or idle mode. Standby mode also defines the
state when the Generator is in fluoroscopic
hangover.
PREP Sets state of the I/O when the Generator first enters
PREP mode.
GEN RDY Sets state of the I/O when the Generator has
completed PREP mode and is ready to expose.
RAD EXP Sets state of the I/O when the Generator starts a
radiographic exposure.
FLUORO EXP Sets state of the I/O when the Generator starts a
fluoroscopic exposure.