![Del Medical EPEX Omniflex IV Service Manual Download Page 31](http://html1.mh-extra.com/html/del-medical/epex-omniflex-iv/epex-omniflex-iv_service-manual_2465595031.webp)
EPEX Omniflex IV System Service Manual
Safety Information
1-17
A frequently used, but less accurate, method of determining the amount of
exposure is placement of film at strategic locations. After a specified
period of time, develop the film to determine the amount of radiation.
Fluorescent screens (used in a darkened room) may also be used to detect
excessive radiation.
A common method of determining whether personnel have been exposed
to excessive radiation is the use of film badges. These are X-ray sensitive
film enclosed in a badge that incorporates metal filters of varying degrees
of transparency to X-ray radiation. Even though this device only measures
the radiation reaching the area of the body on which it is worn, it does
provide an indication of the amount of radiation received.
Radiation Protection Survey
A radiation protection survey must be made by a qualified expert after
every change in equipment or change in operating conditions which might
significantly increase the probability of personnel receiving more than the
maximum permissible dose equivalent.
Restrictions on Use
The user is responsible for ensuring that the application and use of the
EPEX/Omniflex IV System does not compromise the patient contact rating
of any equipment used in the vicinity of, or in conjunction with, the system.
The use of accessory equipment and/or hardware not complying with the
equivalent product safety and EMC requirements of this product may lead
to a reduced level of safety and/or EMC performance of the resulting
system. Consideration relating to the choice of accessory equipment used
with this product shall include:
•
The use of the accessory in the patient vicinity
•
Evidence that the safety certification of the accessory has been
performed in accordance with the appropriate IEC 60601-1 and/or
IEC 60601-1-1 Harmonized National Standards
•
Evidence that the EMC certification of the accessory has been
performed in accordance to the IEC 60601-1-2 Harmonized National
Standards
Summary of Contents for EPEX Omniflex IV
