Del Medical EPEX Omniflex IV, Service Manual

Page: 51 / 238

EPEX/Omniflex IV System Service Manual
Installing the System Hardware 3-3
Personnel Required
Do not attempt to install this equipment with less than two people—three
people is preferable. Each person should wear the proper safety equipment
during the installation.
Tools and Other Equipment
Before starting the installation, ensure that you have the proper equipment
to do the job.
Hammers: A heavy hammer such as a 32 oz ball-peen. Use this with a
block of wood to adjust rails and end caps. You can also use a heavy plastic
or rubber mallet.
Pliers: An assortment of pliers and cutters.
Power tools: Hammer drill, power hand drill.
Screw drivers: Varied flat blade and Phillips head drivers.
Wrenches: Assorted English and metric box and opened wrenches.
Prying tools: You may need various prying bars to remove the equipment
from the crates.
Hand tools: You may need a hand saw or equivalent to remove the
equipment from the crates.
Measuring tools: You need a 25 ft tape rule and a micrometer.
Allen wrenches: You need a varied assortment of Allen wrenches,
including keys and T-handles, in English and metric sizes.
Leveling device: Digital levels (various lengths), plumb bobs, chalk lines,
and/or laser alignment devices.
Clamps: You may want to use clamps to secure various movable parts on
the system if there is no power to activate the brakes.
Lifting device: Minimum 650 lb capacity, minimum 10 ft vertical travel
pallet jack.