40
6.6.1
Channel status
The status of the channel is indicated by the color background of the channel graphics and the graphic appearance of the
channel element. The following table describes the individual states and how they are indicated. This is an overview
information, details can be obtained by clicking on the channel and displaying the channel details screen.
State
Graphic
Design
Indication
Description
Ok
White
background and
green check
Functional channel.
Initialization
Gray background
and inscription
'initialization'
Initialization of communication with the transmitter. The control panel
tries to establish communication and configure the transmitter. In case
of failure, the channel status changes to Fault.
Glow
Inscription
'heating' instead
of value
The transmitter sensor glows when the power is turned on. The
transmitter waits for the values from the transmitter to stabilize. After
stabilization, it switches itself to the measurement mode.
Disorder
Yellow
background
Channel error. The basic error status is displayed in the channel
description. The detailed information about the error can be obtained
in the channel details screen and in the control panel log.
Alarm 1
Value indicator
Alarm 1 is indicated by the color of the value indicator and the A1
mark.
Alarm 2
Value indicator
Alarm 2 is indicated by the color of the value indicator and the A2
mark.
Alarm 3
Value indicator
Alarm 3 is indicated by the color of the value indicator and the A3
mark.
Alarm 4
Value indicator
and red
background
Alarm 4 is displayed by the color of the value indicator, the A4 mark
and the change of the color background of the channel to red.
PEL/STEL
alarm
Condition - blue
triangle
The PEL/STEL channel alarm is indicated by a flashing blue triangle in
the lower right corner. The detailed information about active alarms
can be obtained in the channel details screen.
Calibration
Condition -
calibration mark
Passed transmitter calibration.
Inactive
Gray background
and inscription
'inactive'
Blocked channel. For service and maintenance purposes, the channels
can be blocked in the control panel settings. Attention, resetting the
control panel will unblock all channels.
Table 9 Possible channel states
