39
Transmitters tab
The basic screen of the control panel where the status and values of individual channels are displayed. Each channel is
represented by a graphic element with a description (location) of the transmitter and the measured value. 12 transmitters are
displayed on one page, you can switch between the pages using the navigation buttons. A channel is an active element that,
when pressed, brings up the channel details screen.
Figure 27 Transmitter tab
Item
Description
Channel number
Channel number [1-250]
Transmitter type
Type designation of the connected transmitter
Transmitter address Transmitter address on the bus.
User label
User-defined label is used to identify/mark the position of the transmitter in the installation. The
label can be changed in the channel details screen.
Channel value
Measured channel value including units
Detected gas
Identification of the detected substance, usually gas
Channel value
indicator
Measured value indicator in relation to alarm level 4. Value 0 corresponds to the idle
concentration of the channel, value 100% (full range) corresponds to the value for alarm 4.
Channel status
Details are described in the following chapter.
Table 8 Control panel channel
Transmitter
address on the bus
Channel
Transmitter
Custom channel
label
Measured value of
c units
Detected
gas
Measured value
indicator
Channel
status
Figure 28 Control panel channel
