41
6.6.2
Channel sorting
By default, the channels on the screen are sorted by status. Each state is assigned a priority, channels are displayed from the
highest priority. As a result, the home screen first displays channels that are not working and require the user's attention. If
several events occur at the same time (e.g. Alarm 4 and PEL alarm), the status with the highest priority will be used and
displayed.
The following table shows the channel order:
Priority State
Description
The
highest
Alarm 4
Alarm 3
Alarm 2
Alarm 1
STEL alarm
PEL alarm
Disorder
Calibration
Ok
Function channels and channels in heating / initialization state.
The
lowest
Inactive
Inactive channels have the lowest priority and are listed after functional ones.
Table 10 Channel sort order
Tip: channel switching can be switched off in the control panel settings menu.
6.6.3
Channel details screen
Clicking on a channel element in the transmitter screen opens the channel details screen. The screen displays detailed
information about the status and configuration of the channel. The user can also edit the channel label here.
Figure 29 Channel detail
Dialog item
Description
Description
Control panel description. Touch to call up the value editing dialog
History
Displays the history dialog for this channel's values
Alarms
Display channel events (preset filters in the Events dialog for a specific channel)
Outputs
In 'read' mode, the dialog opens the response matrix of the outputs to the channel
signals
Table 11 Control panel settings dialog
