Status Broadcast*
The
Status broadcast
option allows the user to enable or disable wireless (RF) transmission of
status data to an optional data receiver (contact your Defibtech distributor for details).
Before you begin
: Be sure the unit is in Maintenance Mode.
To enter
: Navigate to
Status broadcast
:
AED Main Menu
Ú
AED options
Ú
Status broadcast
What it does
: The
Status broadcast
option allows the user to enable/disable wireless (RF)
transmission of status data to an optional data receiver. Once the
Status broadcast
option item is
selected, use the TOP and BOTTOM softkey buttons to select either enabled or disabled settings.
When the desired selection is chosen, press the CENTER softkey button to set the feature. The AED
will now use that status broadcast setting. The user may use the TOP or BOTTOM softkey buttons to
navigate to other choices in the menu.
Note
: The factory default setting of the status broadcast is “
Disabled
.”
*
Status broadcast Maintenance Mode menu item only available on DDU-2000 Series units running
software version 2.7 or higher.
6.8 Rescue Options Screen
To manually configure rescue options such as Rescue protocol and CPR breathing, select the
Rescue options
from the AED Main Menu screen.
Before you begin
: Be sure the unit is in Maintenance Mode.
To enter
: Navigate to
Rescue options
:
AED Main Menu
Ú
Rescue options
What it does
: The unit will display the Rescue options menu screen. This screen will allow the user to modify
certain user changeable parameters:
• CPR breathing
• Rescue protocol
– Settings
• Default view
To exit
: Using the TOP or BOTTOM softkey buttons, scroll to and highlight the selection
Go to main menu
.
Press the CENTER softkey button. The unit will exit the Rescue options menu screen and return to the
AED Main Menu.
CPR Breathing
The
CPR breathing
option allows the user to set the AED's default CPR setting to include or not
include CPR breathing coaching prompts during CPR.
Before you begin
: Be sure the unit is in Maintenance Mode.
To enter
: Navigate to
CPR breathing
:
AED Main Menu
Ú
Rescue options
Ú
CPR breathing
What it does
:
CPR breathing
allows the user to set the AED's default CPR setting to include or not
include CPR breathing coaching prompts.
Use the TOP and BOTTOM softkey buttons to select the desired mode. When the desired selection is
chosen, press the CENTER softkey button to set the feature. The AED will now use that coaching setting.
Note
: The factory default setting of CPR breathing is set to “
Disabled
.”
6. Maintenance Mode
44
DAC-U2510EN-BF rev H
