Upgrade AED
The
Upgrade AED
menu selection is a method of performing a unit upgrade and will activate the
system upgrade procedure from a Defibtech Data Card (DDC card) containing an upgrade application.
Note
: Upgrades can also be performed directly from the AED Status Screen if an upgrade card is
present when the AED Status Screen mode is launched.
Before you begin
: Be sure the unit is in Maintenance Mode.
To enter
: Navigate to
Upgrade AED
:
AED Main Menu
Ú
AED maintenance
Ú
Upgrade AED
What it does
: If an upgrade data card is present, the unit will start performing the upgrade process.
Follow any prompts and instructions that the upgrade application provides.
WARNING
Therapy cannot be delivered while an AED software update is in process.
WARNING
Do not turn off the AED or remove the battery pack or the update data
card until an AED software update process is complete as these actions
may render the AED incapable of delivering therapy. If any of these
interruptions occur, restart the update procedure from the beginning.
Note
: If the DDC card is not inserted, the unit will speak and display “Data Card Missing.”
(Refer to the “
Installing The Defibtech Data Card (DDC card)
” section in Chapter 3 of this manual.)
Press any softkey button to acknowledge the message and then install a Defibtech Data Card (DDC card).
To exit
: When the unit finishes performing the AED upgrade, follow the displayed and spoken
instructions.
Transfer Data To Card
Transfer data to card
will initiate a data transfer from the DDU-2000 Series AED to a Defibtech Data
Card (DDC card) inserted in the device. Internal event data and device history is written to the DDC card.
Before you begin
: Be sure the unit is in Maintenance Mode. Be sure a DDC Card is installed in
the device. (Refer to the “
Installing The Defibtech Data Card (DDC card)
” section in Chapter 3 of this
manual.)
To enter
: Navigate to
Transfer data to card
:
AED Main Menu
Ú
AED maintenance
Ú
Transfer data to card
What it does
: The unit begins transferring rescue data to the card:
The unit says: “Transferring data to data card”
The unit displays: Transferring Data
The unit will finish transferring data to the data card and will speak and display:
“data transfer complete.”
Note
: Do not turn off the unit or remove the battery pack or data card until the data transfer is complete,
otherwise the data transfer may be incomplete. Repeat the data transfer procedure from the beginning, if
necessary.
Note
: If a data card is not inserted, the unit will speak and display “Data Card Missing.”
(Refer to the “
Installing The Defibtech Data Card (DDC card)
” section in Chapter 3 of this manual.)
To exit
: When the unit finishes transferring the data to the data card, it will automatically return to the
AED Maintenance menu screen.
6. Maintenance Mode
40
DAC-U2510EN-BF rev H
