4 Description of the product
4.1
General description
The TWH 200 EV water heater has the following specifications:
Floor-standing thermodynamic storage water heater
Thermodynamic unit extracting energy from the air
Remote control panel (wireless) with display of the volume of heated
water and timer programming
Steatite immersion heater (2.4 kW)
Enamelled tank, protected by impressed current anode
Very thick insulation (0% CFCs)
The thermodynamic water heater is a hot water tank heated by:
The heat pump (up to 65°C)
The immersion heater (Electrical back-up – AUTO and BOOST mode)
(up to 75°C)
Management of the energy consumption:
To provide energy savings, the water heater is designed to be connected
to a day/night or HP/HC switch. This switch will authorise the water heater
to automatically start up at the energy provider's scheduled off-peak rate,
therefore at the lowest tariff. The switch has three positions enabling the
water heater to run in auto or continuous mode, or be switched off.
4 Description of the product
EN-7602142 - v11 - 24042019
TWH 200 EV
15
