DeDietrich 1183906, Manual, Page: 148 / 329

21
•
6
CARE
• REPLACING THE LIGHT BULB
Warning
Make sure the appliance is disconnected from the power before replacing the bulb in
order to avoid the risk of electric shock. Carry out the operation when the appliance has
cooled.
Bulb specification:
25 W, 220-240 V~, 300°C, G9.
You can replace the bulb yourself. Unscrew
the view port and remove the bulb (use a
rubber glove, which will make it easier to
remove). Insert the new bulb and replace the
view port. This product contains a light source
of energy efficiency class G.
Follow the instructions in the previous paragraph and then set the end time for the pyrolysis
cycle by pressing . The display flashes. Set the end time with + and - . After these steps,
the start of pyrolysis is delayed so that it finishes at the programmed time. When the
pyrolysis cycle has finished, put the function selector back to 0.
• DELAYED CLEANING
When the oven is cool, use a damp cloth to remove the white ashes. The oven
is clean again and ready for further cooking operations .