DeDietrich 1183906, Manual, Page: 147 / 329

20 21
•
6
CARE
• IMMEDIATE CLEANING
G
L7
40
00
88
The programmer must only display the time. It should not be flashing.
Turn the function selector to one of the self-cleaning functions.
The pyrolysis cycle begins. The time starts to count down at once.
During pyrolysis, the symbol is displayed in the programmer to indicate that the door is locked.
At the end of the pyrolysis cycle, 0:00 flashes.
• = Pyrolysis 2h00
Pyrolysis 2h00 for more in-depth cleaning of the inside of the oven.
CLEANING INSIDE AND OUTSIDE
Warning
Before starting pyrolysis cleaning, remove any large overspills, if any. Remove the ex-
cess grease on the door using a damp sponge.
As a safety measure, cleaning only occurs after the door locks automatically; it is impos-
sible to unlock the door.
• PYROLYTIC SELF-CLEANING
• = PyroExpress in 59 minutes.
This specific function uses the heat built up during a previous cooking cycle to quickly and
automatically clean the inside of the oven: it cleans a mildly dirty oven interior in less than
an hour.
The electronic oven temperature monitor determines whether the residual heat remaining
in the oven interior is sufficient to provide a good cleaning result. If this is not the case, a
90-minute ECO pyrolysis cycle will automatically begin.