DEC Digital HiNote Ultra 2000 series, Service Quick Reference Manual

Page: 96 / 131

Troubleshooting
4-23
Warning Messages
The following is an alphabetic list of error and status messages
which the PhoenixBIOS can generate and an explanation of
each message. Many of the messages below refer to the built in
Setup program.
Message Description
nnnn Cache SRAM
Passed nnnn is the amount of system cache in
kilobytes successfully tested.
Diskette drive A error Drive A: is present but fails the BIOS POST
diskette tests. Check to see that the drive is
defined with the proper diskette type in
Setup and that the diskette drive is
attached correctly.
Entering SETUP Starting Setup program
Extended RAM Failed
at offset: nnnn Extended memory not working or not
configured properly.
nnnn Extended RAM
Passed nnnn is the amount of RAM in kilobytes
successfully tested.
Failing Bits: nnnn The hex number nnnn is a map of the bits
at the RAM address (in System, Extended,
or Shadow memory) which failed the
memory test. Each 1 (one) in the map
indicates a failed bit.
Fixed Disk 0 Failure
or Fixed Disk 1
Failure or Fixed Disk
Controller Failure Fixed disk is not working or not configured
properly. Check to see if fixed disk is
attached properly. Run Setup to ensure
that the fixed-disk type is correctly
identified.
Incorrect Drive A type
run SETUP Type of floppy drive A: not correctly
identified in Setup.
continued