DEC DECNIS 600, Installation And Service Manual

Page: 97 / 288

7
Removing Network Interface Cards
This chapter describes how to remove a Network Interface Card from a
DECNIS 600 running system.
Note
If you want to hotswap a Network Interface Card, consult the
documentation for the software you are using with the DECNIS 600
before you remove the card. The hotswap procedure may affect the
Network Interface Card software.
7.1 Tasks
Complete the procedures in Sections 7.2 to 7.7 to:
1. Prepare to remove the card
2. Attach the static protection equipment
3. Disable the Network Interface Card
4. Detach the communications cables
5. Remove the Network Interface Card
6. Replace the slot cover
7.2 Preparation
Make sure you have the following available:
• Antistatic kit that includes an antistatic wrist strap and antistatic mat
• A 3 mm (
1
8
in) flat blade screwdriver
• Antistatic bag and packaging for the Network Interface Card
Removing Network Interface Cards 7–1