DEC 3000 800, Owner'S Manual

Page: 96 / 318

Connecting to an AUI Ethernet Network
Connecting to an AUI Ethernet Network
Procedure
Overview To connect your system to an AUI Ethernet network, sometimes
referred to as thickwire or standard Ethernet, complete the steps
in Table 5–2.
Table 5–2 Steps for Connecting an AUI Ethernet Network
Step Action
1 Removing loopback connector.
2 Connect the AUI Ethernet cable.
3 Move the sliding lock.
Step 1:
Loopback
Connector If the loopback connector is still connected to your system,
remove it now. Keep the loopback connector in a safe place. You
may need it later for testing purposes.
Step 2: AUI
Ethernet Cable
Connect the AUI Ethernet cable (BNE4C–xx) to the AUI port on
the rear of the system unit as shown in Figure 5–1. Be sure to
attach the cable securely.
5–4 Connecting the System to a Network