DEC 3000 800, Owner'S Manual

Page: 207 / 318

Interpreting the show Command Display
The show
memory
Command The
show memory
command displays information about all of
the memory in your system. This command lists a line of
information about each memory bank. Note that the display will
not indicate an error found in memory. You can only display
memory errors using the
show error or the test mem command.
The test commands are described in Chapter 14.
The show
memory
Display Figure 13–7 shows an example of a
show mem
command display.
Figure 13–7 The show memory Display
>>> show memory
DEC 3000 - M800 Memory: 128 Mbytes
------------------------------------------
BANK #
MEMORY_SIZE START_ADDRESS
------ ----------- -------------
0 032 Mbytes 0x00000000
1 032 Mbytes 0x02000000
2 032 Mbytes 0x04000000
3 032 Mbytes 0x06000000
4 000 Mbytes 0x00000000
5 000 Mbytes 0x00000000
6 000 Mbytes 0x00000000
7 000 Mbytes 0x00000000
>>>
Elements in the
show memory
Display Figure 13–7 indicates that memory banks 0, 1, 2, and 3 each
have 32 megabytes of memory. There is no memory in banks 4,
5, 6, and 7 on this system.
Identifying a Problem 13–21