DEC 3000 800, Owner'S Manual

Page: 115 / 318

Starting a System with Factory-Installed Software
OpenVMS AXP
Initial Startup
Screen
If your system has the OpenVMS AXP operating system factory-
installed, you will see a display similar to the one shown in
Figure 6–3 when you first turn on your system and after the
system startup messages are completed.
Figure 6–3 OpenVMS AXP Initial Startup Display
+--------------------------------------------------------------------+
|
OpenVMS Operating System |
| |
| Factory Installed Software Procedure |
+--------------------------------------------------------------------+
Welcome to the OpenVMS Factory Installed Software (FIS) procedure.
Please wait while the FIS procedure initializes the system. This will
take between one and five minutes, depending on the type of computer.
System initialization continuing, please wait...
System initialization continuing, please wait...
System initialization continuing, please wait...
OpenVMS AXP
Startup Dialog The OpenVMS AXP Factory Installed Software (FIS) procedure
that runs when you first start your system prompts you to
answer some questions, and then restarts your system. To get
help on any question, press
?
and press the Return key at any
of the prompts. Follow the instructions on the screen to complete
the dialog.
Log In to Your
System After the OpenVMS AXP Factory Installed Software (FIS)
procedure is complete, you can log in to your system as follows:
• If your system is configured as a workstation, the
DECwindows Motif Start Session screen, shown in
Figure 6–4 will be displayed.
Starting Up the System 6–9