DEC 3000 800, Owner'S Manual

Page: 221 / 318

Running Diagnostic Tests
Using the test
Command Depending on the way you enter the
test
command, you can run
a single test or multiple tests on a component.
Single Test
Syntax
Use the following syntax to run a single test:
>>> test device_name
Return
where device_name is one of the device names listed in
Table 14–2.
Multiple Test
Syntax Use the following syntax to run multiple tests:
>>> test device_name1:device_name2
Return
where device_name1 is the device you want to start with, and
device_name2 is the last device you want to test. The diagnostic
tests are run in the same order as the list of device name tests
in Table 14–2.
>>> test
Return
runs all tests including TURBOchannel tests.
Example
Diagnostic Test One diagnostic test is the SCC test, which tests the
communication devices attached to your system unit, such
as the keyboard and mouse. Figure 14–1 shows an example of
an SCC test display.
Figure 14–1 SCC Diagnostic Test Display
>>> test scc
Return
T-STS-SCC-OK
>>>
Running Diagnostic Tests 14–5