DEC 3000 800, Owner'S Manual

Page: 64 / 318

Connecting the Workstation
Step 5: Monitor
Cables to
Monitor
Complete the following steps to connect the monitor cables to the
back of the monitor.
• Step
!
for a color monitor.
• Step
"
for a monochrome or greyscale monitor.
• Step
#
for all monitors. Table 3–3 shows the locations of the
connectors on the backs of various monitors. Shaded areas
indicate location of connectors.
Table 3–2 Making Monitor Connectors
Step See diagram with... Then...
!
Three connectors
(color monitor) Connect all three cable connectors
to the monitor, matching the color
cables, red (R), green (G), and
blue (B), with the corresponding
connectors marked R, G, and B on
the monitor.
Five connectors
(color monitor) Do not use the H/C and V
connectors. Connect the other
three cable connectors as
described above.
Six connectors
(Video In and
Video Out) Use the three Video In connectors.
Connect the three cable connectors
as described above.
"
One connector
(monochrome
or greyscale
monitor) Connect only the middle, green
(G) cable connector to the monitor.
#
Monitor power
cord Connect the monitor power cord
to the power socket on the rear of
your monitor. The power socket
may be in a different location than
the position shown here. Make
sure the On/Off switch is in the
Off (O) position, and then plug the
other end of the monitor cord into
an appropriate outlet.
3–10 Installing a Workstation System