DEC 3000 800, Owner'S Manual

Page: 224 / 318

Running Diagnostic Tests
Example
TURBOchannel
Test To test a device connected to slot 2, enter the following command:
>>> test tc2
Return
To show the configuration of a device connected to slot 2, enter
the following command:
>>> test tc2 cnfg
Return
If test_name contains a slash (/) or a hyphen (-), enclose test_
name in double quotes.
Initializing Your
System After you have run a test, you should use the following command
to initialize your system to clear the error log from the system
register. Figure 14–3 shows an example of the
init command.
Figure 14–3 Initializing Your System
>>> init
Return
INIT-S-CPU...
INIT-S-RESET_TC...
INIT-S-ASIC...
INIT-S-MEMO...
INIT-S-NVR...
INIT-S-SCC...
INIT-S-NI...
INIT-S-SCSI...
INIT-S-ISDN...
>>>
14–8 Running Diagnostic Tests