DEC 3000 800, Owner'S Manual

Page: 201 / 318

Interpreting the show Command Display
Elements in the
show config
Display The
show config
command displays three columns of information
described in Table 13–9.
Table 13–9 The show config Display Described
Display Heading Description
TCINFO TURBOchannel device information.
Information next to the TCx component
indicates which TURBOchannel option
is installed and the slot number it
occupies.
DEVNAM Name of system component or module.
DEVSTAT Status of system component or module.
Interpreting the
show config
Display If no errors are detected when you enter a
show config
command, you will see the message OK next to each device
name. If an error is detected for one or more system components,
a question mark (?) error indicator will be displayed in the
DEVSTAT column next to the corresponding device name.
If you see an error indicator next to any device name, as shown
in Figure 13–4, note the error number and the DEVNAM on the
Handling Problems worksheet at the end of Chapter 14. If you
wish, you can test the device that shows an error in the
show
config
display by following the instructions in Chapter 14.
Identifying a Problem 13–15