dbx DriveRack 480, User Manual

Page: 53 / 117

Storing Changes
®
44
Section 5
DriveRack
™
®
DriveRack™ User Manual
Once program editing functions have been made to programs in the 480, 481 or 482
DriveRack™ units, you will need to save any changes that have been made to the selected unit.
The following section will provide you with information on making the most effective and effi-
cient program saving and storing changes in the DriveRack™.
Once you are satisfied with the changes that have been made to a factory or user program, the
DriveRack allows you to save these changes to save the program as a custom USER program
by simply pressing the
STORE
button and the display will appear something like this:
• Rotate the
PARAMETER 2
knob to move the cursor position. Rotate the
PARAMETER 1
knob to select the desired character. Push the
PARAMETER 1
knob to toggle between
upper and lower case characters.
• Once you are satisfied with the selected name, press the
STORE
button again and the screen
will appear something like this:
• If you wish to replace an existing User program, press the
PARAMETER 1
knob and the dis-
play will appear as follows:
5.1 Saving Program Changes
Storing
Changes