dbx DriveRack 480, User Manual

Page: 65 / 117

Utilities
®
56
Section 6
DriveRack
™
®
DriveRack™ User Manual
• Use the
PARAMETER 3
knob to select the desired microphone input. Mic input options
include: Ch3, Ch4 and Ch3 and 4 simultaneously. Warming - RTA will not function proper-
ly when using a microphone unless the option has been set appropriately.
The DriveRack™ units provide the user with the redundancy feature. This feature allows the
selected master unit to retain all programming information of all unit used in a DriveRack™ net-
work. This simply means that in the unfortunate event that one of the units goes out of ser-
vice, a replacement unit can be added into the network and the information from the previous
unit will be added via the master unit. For more information about Redundancy, please refer
to section 7.4. To enable this feature, use the following procedure.
• Enter the “Utility” menu by pressing the
UTILITY
button once.
• Press the
NEXT PG or PREV PG
button until page 11 is reached.
• Use the
PARAMETER 1
knob to set the Redundancy feature to On. The display will appear
something like this:
The DriveRack™ units are capable of responding to Cue AFL MIDI commands from mixing con-
soles including: Soundcraft™ SM20 and Series 5, Allen & Heath™ ML5000 and Midas™ Heritage
To enable this feature, use the following procedure.
• Enter the “Utility” menu by pressing the
UTILITY
button once.
• Press the
NEXT PG or PREV PG
button until page 11 is reached.
• Use the
PARAMETER 2
knob to set the Cue AFL feature to On. The display will appear
something like this:
• Note - To use the CUE AFL function, the UART mode must be set to: MIDI.
6.16 Cue AFL
6.15 Redundancy Enable