dbx DriveRack 480, User Manual

Page: 61 / 117

Utilities
®
52
Section 6
DriveRack
™
®
• Rotate the
PARAMETER 1
knob to set the length of the Program list size. The program list
size can be any number from 1-10.
• Rotate the PARAMETER 2 knob to set the index position of the selected program.
• Rotate the PARAMETER 3 knob to set the selected program in the currently selected index
position.
• Once the custom Program list has been created, press the PROGRAM/CONFIG button to
exit the UTILITY menu.
Within the UTILITY section of the 480, 481 or 482 DriveRack™ units, you have the ability to
navigate (from Program mode) through the various programs by either the conventional pro-
gram mode or by using the custom program list (which was covered in section 6.5). By setting
this option to Program List, you now have the convenience of using only your selected pro-
gram contained in the list. The procedure for selecting either one of these modes of program
navigation can be set from page 5 of the Utility menu and is as follows:
• From Program mode, press the UTILITY button and move to page 5 of the Utility menu by
using the NEXT PG and PREV PG buttons. Once you have reached page 5, the display
will appear as follows:
• Use the PARAMETER 1 knob to select either Program list or Normal modes of operation.
Once you have made your selections, press the PROGRAM/CONFIG button to return to
program mode.
6.6 Program Change Mode
DriveRack™ User Manual