dbx DriveRack 480, User Manual

Page: 76 / 117

®
The Redundancy function of the 480, 481, and 482 DriveRack™ units is the very definition of
the old saying that you can never be too safe. This unique function of the DriveRack™ units
ensure that programming information in the 480, 481 and 482 DriveRack™ units is safe guard-
ed in the event of any unfortunate malfunction. Simply put, this means that the program
information within any 480, 481 or 482 DriveRack™ is constantly being backed up and stored
not only into the memory of the selected unit, but also the master unit of the DriveRack™
network as well as the 480R (if used) and the PC GUI. Simply pull the unit out, and insert a
new unit in its place. The following information will provide you with ways to optimize this
priceless feature.
• To enable the Redundancy feature, enter the Utility menu by pressing the Utility button
and then using the
NEXTPG
and
PREVPG
buttons to move to page 11 of the utility
menu. Use the
PARAMETER 1
knob to engage the Redundancy Mode. The display will
now appear as follows:
• At this point, the master unit, 480R (if used) and the PC Interface (if used) is/are now
recording any activity that takes place within the network of units.
Replacing Units
• If a DriveRack™ unit needs to be taken out of the network backbone, the master unit
automatically stores the unit’s information until the unit is either returned or a replacement
unit is put in its place within the network.
• Once a DriveRack™ unit is inserted, the master unit will automatically download the last
information that it received from the corresponding unit, regardless of whether the editing
information had been stored.
• NOTE: Anytime a unit is replaced, the same identification number must be assigned to
the replacement unit in order for the master unit to recognize and send information.
7.4 Redundancy
Network Functions
SECTION 7
DriveRack
™
67 DriveRack™ User Manual